Thermal imaging technology offers technicians the ability to see an invisible object making it convenient to easily discover electrical and motors components. Through comprehending the way thermal pictures function and the ability to execute in detail the procedure involved in its administration successfully, doctors can easily diagnose any condition, and managers can submit profits to their organization and departments, and so on.
The use of thermal imaging technology is immense, and that is why like other types of equipment it needs constant care. Providing proper care for your TIG (thermal imaging gadget), will boost its function and make it last longer. Below are ways of caring for your product.
1. Periodic maintenance routine:
The gadget will work better if routine maintenance is observed. This is a very critical procedure because the TIG will serve you well anytime you need it. One of the most overlooked devices is the thermal imaging display cover or lens. It is easy to unscrew the lens and clean the dirt and soot off it. Check the battery regularly to ensure it is on top working condition.
2. Inspect the external part regularly:
Secondly, to keep your thermal imaging binoculars gadget working optimally, you must carry out a regular inspection for cleanness and damages. Maintaining constantly clean TIG indicates that the upper part of the device is always looking bright. The reason the upper part must look shiny is not that it will make you feel good; the fact is that the brighter and cleaner it looks, more effective the camera will work at reflecting light instead of absorbing it.
Excessive build-up of dirt and soot could increase the absorption rate of the bright heat and this will negatively affect the length of time the gadget will function under very hot conditions. All that is required is to clean the TIG regularly with water and soap, the everyday detergent will do. If there are stubborn stain issues, utilize a degreaser for removing the dirt and stain. Never apply direct bleach or solvent that contains hydrocarbons on your temperature imaging gadgets as they are capable of destroying the rubber seals or thermoplastic covering.
Once the dirt has been taken off, proceed to visually examine it for damages and check if there is a separation of the outer parts. Additionally, it’s also pertinent to examine all neoprene or rubber, checking for crumbling, pliability, tears, and additional noticeable cracks, damages, and separations.
The lens must remain clean:
Always ensure that you check the lens regularly, ensuring it is constantly clean and free of dirt so that the quality of the image will not be affected. If you have had an occasion when your thermal gadget isn’t functioning properly, the fault is probably a dirty or stained lens, which affected the picture quality directly. This accumulation of stains on the lens could bring down the quantity of thermal power entering into the device, hence decreasing total image quality in addition to causing a blurry picture.
To clean the lens is difficult, and that is why you should call the TIG and the AGM Global Vision producer to request for assistance, they will advise you on what to do. Usually, the advice may be the best type of cleaning agent to use; in worst cases, you may have to get another lens.
Battery checks:
Performing regular battery checks is another important maintenance option for TIG. It is pertinent to constantly check the battery to make sure it is always full. Thermal imaging devices come with various battery innovations like lithium-ion, alkaline, and lithium-ion phosphate. In some cases, you can see batteries that run for 8 hours, this is good, but you will need to search for it.
When researching for a battery that can stay on for long hours, you should first determine the first operating time and the circle life of the battery. The possibility of your thermal device lasting for a long time relies on your precautionary maintenance schedule and how many times the device is used.